Setting up the GL-MT3000 VPN Router
- 9694rad
- Nov 14, 2024
- 1 min read
The necessary equipment you should have is 1 VPN router, 1 power cord, and 2 ethernet cords.
The first thing to do it to insure the power cord is connected.
Next step is to plug an ethernet cord that runs from your home modem to the slot on the VPN router thats labeled 2.5 WAN
The next step is to plug the other ethernet cord that runs from your computer/laptop to the slot on the VPN router thats labeled LAN.
Once the power cord and the 2 ethernet cords are connected to the correct slots, the router will take a few minutes to totally boot up. Once it does, the light on the router should be steady.
Comments